ASA-GF

Eryone ASA-GF is an easy-to-print 3D printing material characterized by high
strength, high rigidity, weather resistance, anti-yellowing, aging resistance, and
corrosion resistance. It is designed for easy shaping, with a low tendency to crack or
warp, and supports open printing environments. The printed parts are robust and
feature a matte, frosted surface texture. This material is ideal for applications requiring
specific strength or weather resistance in end-use products, such as automotive interior
components, garden furniture, and outdoor leisure structures. It contains 10% fiberglass.

Part I:Suggests Printing Parameters

Parameter	Set up
Nozzle temperature	260℃-280℃
Bed temperature	90-100℃
Bed materia	glass, PEI, spring steel plate
Bottom printing temperature	260℃-280℃
Sealed printing	supports open printing, and the sealing effect is better if it is sealed
Printing speed	30-150mm/s
Drying conditions	80℃，4H

Part II:Physical Properties of Materials

Property	Testing Method	Unit	Typical Value
Density(g/cm³ at 21.5 ° C）	ASTM D792 (ISO 1183, GB/T 1033)	g/cm³	1.17
Vicat Softening Temperature(° C)	ASTM D1525 (ISO 306 GB/T 1633)	℃	/
Heat distortion temperature(° C)	ASTM D648 1.8MPa 0.45MPa	℃	86
Glass transition temperature (° C)	DSC, 10 ° C/min	℃	104
Melt Index(g/10 min)	220 ° C, 10kg 240 ° C, 2.16 kg	g/10min	10

Part III:Mechanical Properties of Printed Samples

Property	Test conditions	Test standards	unit	Typical Value
Tensile strength X-Y	50mm/min	GB/T 1040.4	MPa	34.2
Elastic modulus X-Y	50mm/min	GB/T 1040.1-2006	MPa	1857.9
Elongation at break X-Y	50mm/min	GB/T 1040.4	MPa	4.3
Tensile strength X-Z	50mm/min	GB/T 1843	MPa	21.2
Elastic modulus X-Z	50mm/min	GB/T 1040.1-2006	MPa	1593.1
Elongation at break X-Z	50mm/min	GB/T 1040.4	%	2.1
Bending strength	2mm/min	GB/T 9341	MPa	54.3
Bending modulus	2mm/min	GB/T 9341	MPa	2623.5
Charpy Impact strenght	2.75J	GB/T 1043.1-2008	kJ/m2	9.6

Note: All splines are printed under the following conditions: printing temperature=270 ° C, printing
speed=80mm/s, base plate 95 ° C, filling=100%, nozzle diameter=0.4mm

ASA Glass-Fiber

ASA Fiberglass Filament - 1.75mm±0.03mm (1kg)